Give is a 14 HP Classic Analog VCO with additional Waveshaping options.
The VCO has five outputs
The frequency of the waveform may be changed with the TUNE and FINE potentiometers.
There is also an adjustable OCTAVE SWITCH. Each octave can be tuned separately using
the OCT DOWN and OCT UP pots.
Patching a voltage source into FM you can frequency modulate the oscillator. Incoming
voltages can be attenuated with FM CV. In the middle of the module you will find
the PWM potentiometer. Here you may change the pulse width of the pulse wave. The
width may also be controlled via external voltage with the PWM jack and the PWM CV
Just like all other classic analog VCOs GIVE also tracks one volt per octave with
the help of the 1V/OCT input jack. Each wave can also be hardsynced by an external
wave patched to the SYNC jack.
In addition to the standard waveform outputs there are two WAVESHAPE options that
help to sculpture the SAWTOOTH wave. The shape can be changed by both potentiometers
S1 and S2 or with the help of to CV inputs. S1 CV1 & 2 are also chained to S2. S2
will only have an extreme small effect on the waveform though. This way you can create
very subtle changes without an attenuator in order to keep the sound of the wave
interesting for the human ear. You may increase the effect using S1 CV in order to
affect S2 out.
Classic Analog VCO
5 Outputs: SAW, TRI, PLS, S1, S2
Adjustable Octave Swith
Pulse Width Modulation with Attenunator
Frequency Modulation with Attenuator
Separate WAVESHAPE outputs
2 CV Inputs per Waveshaper
Skiff friendly design
Wrong Polarity Protection
3U Eurorack module, 14 HP wide
Power consumption: 28 mA at +12 V and 24mA at -12 V